Clean. Press. Twist. Then give it a day.
8 small steps, no tools, about two minutes. The only patience it needs is the 24 hour set time before you hang anything heavy.
Step 1
Clean
Wipe the surface until it's free of dust, oil and any cleaning residue. Let it dry completely.
Step 2
Open the hook
Twist the knob anti clockwise to separate the parts.
Step 3
Peel
Peel the plastic film off the suction cup to reveal the no residue adhesive layer.
Step 4
Press
Place the suction cup on the clean, dry surface and press firmly from the centre out to remove air bubbles.
Step 5
Add the compression piece
Fit the compression piece onto the hook base.
Step 6
Seat the base
Place the hook base, with the compression piece attached, onto the suction cup.
Step 7
Twist to lock
Keep the pressure on and attach the knob. Twist clockwise until it won't tighten any further.
Step 8
Let it set
Leave the hook alone for a full 24 hours. Nothing hanging, no touching. Then your hooks are ready to use!
Good to know
Over time every suction hook gradually loses some grip. It's completely normal. A Suction Pad Replacement Set brings back a firm hold without replacing the hook.